• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Sash Repairs

Many homeowners don't care about window sashes as long as they can be closed and opened, they keep outside air out and the interior air in. But over time, they can start to wear out, leading to drafts, air leaks, or even sashes that stick.

The author makes use of an sash propped up on an easel to work the glazing points into the gap. He also scrapes paint off and applies a wood preservative to the frame.

Sash Weights

If your windows aren't closing and opening smoothly or are sluggish, a faulty counterbalancing system could be at fault. This can occur due to a missing or damaged sash cord/chain, an unattached or misaligned sash weight, or a damaged pulley.

The sash window renovation weights are small boxes, usually made of cast iron that support the sash and balance the window's counter-weight system. They are located on the bottom rails of every window frame. They are covered by wood panels which can be removed to reveal their location. These panels can be removed for access to the pockets of sash weights for cleaning, repairs or replacement.

There could be a problem with the sashweights if had your windows with sash windows for over a period of time. They might lean or catch. This can be caused by the weights being too heavy (they are supposed to be a little heavier than the top sash) or due to them being installed in a way that isn't correct (some people have disabled their weight systems by cutting them off and removing the weights to save money or turn them in for scrap metal).

To address this problem, first pull off the stops (the trim that runs along the inside edges of the window where it joins the frame and keeps it in the frame) and then set them aside. This will require you to be gentle in order to not harm the shape of your meeting rails. You can then make use of a mallet or hammer to break the rail and stiles and inspect them for damage or any repairs that must be done.

After you've examined the stiles and rails, lay down some dust sheets and start working on the sash itself. Start by removing wood pegs using a pin-punch and a hammer or screwdriver from the mortise and tenon joints. Once the pegs are gone you can begin to disassemble the sash by removing the sash stop moldings, pulling off the sash cord knots that are connected, and then taking the sash off itself.

Next, you will need to weigh the sash in order to determine the amount of weight it will require for functioning. You can purchase old-fashioned replacement sashweights online or in some home improvement stores. Make sure you get the right size to avoid over - or under-weighing the sash.

Sash Cords

double glazed sash windows for listed buildings cords that are worn out or broken can cause sash window issues. The weights put pressure on the sash's cords and this could cause them to break over time. The sashes will not open or close as easily when the cords break. The problem may be caused due to excessive force, aging or lack of maintenance or the buildup of moisture. During window sash repairs, it's important to replace the old cords with new ones that are made from materials that last and resist moisture.

Begin by removing the inner stop strips, the thin wood strips that hold the sashes into their place, using a utility blade and a Chisel. Take care to remove the stops of the sashes while keeping an eye on any that are cracked or broken. Once the stops are removed, you will be able to access the sash's weights by using an access panel cut into the frame's bottom, or by opening the jamb and removing the cover for the weight pocket.

It takes a little extra work to reach the flush sash windows cords, but with the proper tools and a bit of patience, it's not difficult. First, take off the old cords by cutting them close to their knots and pulling them free. Take the sash off and set it aside. Pull down the staff bead. This is the nail that keeps the sash in position. Insert an approximately one foot in length into the hole. This will temporarily keep the sash from falling while you finish stringing the counterweights.

Reattach the sash string after installing the upper sash. Verify that the sashes move smoothly and are balanced. Then, you can reinstall the lower sash, and repeat the process, ensuring that the sashes are sitting and moving smoothly.

After you've installed the counterweights, reattach the sash cords by placing an sash cord into the pulleys and then threading the cord's other end through a knot hole inside the sash, ensuring it is secured in the correct position. Repeat the process for each side of the sash until cords have been replaced and the sashes are operating normal.

Drafts and air leaks

Over time, the materials that connect your sash window to the frame of your home deteriorate. This can cause drafts and energy losses. A thorough inspection can identify the areas of concern and assist you in determining your window sash repairs options. Your preferences regarding comfort and skill level influence whether you are able to manage window sash repairs or require professional input. The scope of work required is also influenced by the historic status of the property and its the structural strength.

If cold air enters through a drafty window your furnace has to perform overtime to keep your home warm. This can result in higher heating costs and could compromise the efficiency of your HVAC system. Drafts can also impact the quality of indoor air and affect indoor comfort by adding allergens, pollutant and humidity from the outside.

A drafty window is evident by the sensation of cold air rushing into a room, even when all doors and windows are shut. Other indicators to look out for are an increase in temperature close to the window, and condensation on the sill or frame.

Fortunately, repairing drafty windows is a relatively simple task that can reduce your energy costs and enhance the indoor comfort. First, inspect the exterior of the window. Look for bare wood and areas where the old caulking has cracked, exposing the gaps to cold air.

Examine the sash's interface with the frame. This includes the parting bead, and the staff bead. Check the condition of the weather stripping (felt strips or foam tape) at these locations to determine if it's still intact and functional. If not, it needs to be replaced.

Examine the condition of glazing putty. It's a hard putty used to keep panes of glass tempered in place. Check for cracks or crumbling that expose the sash's surface to moisture which could cause mold issues and damage to the windows' glass.

Apply a new layer of glazing putty to the inside of the window to fix the issue. Using a flat-blade screwdriver, push the glazing points in place to secure them. Wrap a piece of fabric and foam around each point. This will act as an insulation against cold air.

Aesthetics

Window repair for sash windows can give older windows a new look at a lower cost than a full window replacement. A complete window replacement can be costly and time-consuming task, especially for older homes. In many cases, fixing window sashes can bring back the original appeal of a home and increase its value as well.

Monitoring the condition of your window sashes is important to prevent major problems. It is recommended to speak with an expert if not sure if your windows require repair. The cost of a sash repair is typically lower than the expense to replace the whole window, and can reduce your energy bills as well.

The first step is to lower the upper sash down to the bottom. This is generally simple and allows you to observe the "parting beads", which are the grooved bits on the rails at the junction which keep the two sliding sashes apart. Remove these with the blade of a small bar or a putty blade - they are typically nailed in place and glued with paint so you need be careful not to harm them or the sash.

After removing the parting beads you'll need to take off the pockets. These are bits of wood within the frame, low down, that allow access to sash weights and are normally fixed with nails - they can also be stuck with paint so you need be extra cautious. After they have been removed, the sash will be moved between the two sides to ensure that it is moving smoothly.

If it doesn't, it may be a problem with the counterweights or sash cords. After you've checked all these, you can repair them as required.

Wooden windows are beautiful and natural. They are a great fit with contemporary or traditional interiors. They can also be made to be highly customizable with a wide range of paint and stain options. Wooden windows require regular maintenance in order to keep them from rotting and damage.