• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace Door Handles

Door handles are an essential part of your home's decor. A new handle can bring your home's decor up-to-date.

Over time your knobs for your doors can begin to feel stiff and even break. These are indications that it's time to change the knobs. This guide will help you choose the correct door handle replacement for your home.

Door Knobs

patio door handle handles add to the look of your home, while making it easier for people to open and close doors. They are available in a wide variety of finishes, colors and styles to complement your decor. If yours are starting to show signs of wear or just need an upgrade, replacing them is relatively simple and can be done in a few steps.

The first thing you have to find is the spindle or shaft through the knob's attachment to the door. Some have a tiny hole that you can put an incredibly small screwdriver to remove the set screws that hold the knob in place. Some have a tiny slot or hole through which allows you to press the spring-activated detent pin using flathead. The pin opens the latch mechanism and allows you pull or push the knob.

Once you have access to the spindle or shaft, take off the door knob and replace it with the new one. Check that the latch is working properly before tightening the set screws.

Once you've replaced the knob, put the rod for latching over the door's hole and lock it in place with the rod mechanism on the second knob. Make sure the holes are lined up, then thread in the screws on the latch plate and tighten them.

Some prefer the smooth or brushed finish on their door hardware for modern, sleek design that matches other furnishings in their homes. Others prefer a more rustic look that is a good match for rustic-styled rooms. If you have someone in your family with mobility issues, you might prefer the lever or rim lock that requires less pressure to operate.

Other factors are being considered more and more for the design of door handles. Infection control and accessibility have been major considerations when it comes to developing new designs for handles. For instance, some can be operated using the arm of a person.

Latch

The latch that holds your door handle open can wear out from the wear and tear of use. Changing out the old latch to fit a new handle can be an easy DIY task and will make a significant difference in the way your door opens and closes.

Depending on the kind of handle you have the latch could be part of the knob or it could be an individual piece that is attached to the door itself. In either scenario, the same procedure to remove and install will apply. Getting the old latch out of the way is relatively simple particularly if your door Brompton Carry handle (https://king-wifi.win/wiki/Vanceconley1751) is equipped with what's called a "magic button". Located on the side of the knob, this small pressure-slot is what you need to press to pull the latch right out of the handle and out of the latching mechanism.

If your handle does not have this button, the first step is to take off any cover plates that rest over the latch plate. These are usually rectangular or circular and can be removed using the help of a screwdriver. Some have a tiny slot inside that you can put your screwdriver, whereas others simply snap off.

The next step is to remove the two machine screws that hold the latch and the plate to the door handle. You'll need to keep the screws that are shorter and have a pointed tip in a secure location so that you can reuse them later. Once the screws are removed you can remove the latch plate and mechanism out of the hole in the door and set it aside.

Now you can begin installing the new latch. Place the inside of the latch into the hole in the patio door handle replacement and secure it using the hardware supplied. Make sure the square pin on the inside of the latch is facing the latching mechanism inside the handle and that it lines up with the other screw chambers of the door handle. Then attach the latch's exterior plate using the screws supplied.

Strike Plate

It is common to replace a door handle when it is loose or doesn't lock properly. This is usually due to misaligned components in the latching mechanism, such as a strike plate that's too small or has moved up or down on the doorjamb with time. This project allows you replace upvc door handle your old upvc window handles strikeplate with an extended one, which can provide more security for your door and ensure it stays closed.

Apply a lipstick or other marking material on the latch bolt to determine if it's the strike plate. Close the door and try to latch it. If the mark is lower than the strike plate hole it indicates that the plate is too small and the door will not latch. If the mark is above or below the strikeplate hole the strikeplate is likely to have been moved up or downward on the doorjamb.

You might be able to install the new strikeplate in place over the existing one using the screws included with it, depending on the door you have. You may need to drill holes first and then chisel the wood to ensure a perfect fit. If this is the situation make sure you don't be too rough with the chiseling process or you may ruin the strength of the doorjamb.

Installing a brand new box-style strike plate will give the lock a stronger hold on the doors and will require more force to open the doors. It usually requires two longer screws to secure the strike plate to the frame of the door. To do this, you'll have to remove the current strike plate, then drill and chisel away the wood to make room for the new one.

This difficult-to-find strike plate was designed to be used with antique rim locks and is made of robust solid brass with the heavy duty thickness. It comes with wood screws and machine screws, ensuring that you have the right hardware for your job. Remember that wood screws have a pointed tip and machine screws have a blunter tip.