• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Locked Keys in Car? Here's How to Open Your Car Without Damage

If you've locked out of my vehicle your keys inside your car, don't be afraid. You can try several tricks before calling a locksmith or roadside assistance.

For instance, you could make use of a shoelace with an a slip knot to pull up the post lock, or a coat hanger made of wire that you untwist and mold into hook. You can also use a door wedge or an inflatable wedge.

Pump Wedge

If you've been stuck in a locked car and no DIY solutions like wire hangers, shoestrings or wedges are working for you then it's time to call in a professional. A locksmith or a repo service provider may have lockout tools that will allow you to open your car without causing damage to it.

If they do, be sure you use them correctly. Be aware of where to insert the wedge tool. Many people put the wedge tool in the top corner of a door, which is the most vulnerable. This is a mistake since you risk damaging the wires and weather stripping inside the doors. Place the wedge in the area where you can see the biggest gap and where the maximum leverage is.

The Pump Wedge is an inflatable wedge made of high-quality vinyl that doesn't scratch the surface. It is able to slide between the door of your vehicle and the door frame, and is pumped up to create a space that allows you to insert other tools like an extended reach car opening tool rod. It also has a hook at one end that you can use to secure the latch within the door unlock service handle.

This can be done with a pair wooden door stops. You can use them to open the gap between the back of the door. You could also try using a slim jim which is a thin metal strip that can be bent into a hook to latch to the lock and then pull it up. This method requires some practice, however, since you need to be careful not to tear the door's weather stripping.

A shoelace is a good option, but it works only with older cars that don't have a button to unlock the mechanism. You can tie a slip knot through the middle of the lace, and then move it up and down through the door's seam until it reaches the latch. After that, maneuver the lace until it hooks the lock, tighten the slip knot and pull upward. This method can be more difficult than other ones and can scratch paint or damage the door trim if you aren't cautious.

Inflatable Wedge

You can easily unlock your car by using an inflatable wedge-shaped door opener. This will spare you from the need to use prying tools or slim jims. These wedges can be placed between the frame and window of the car. They when they are inflated, they provide a wide space to insert a tool with a lengthy reach, like a button grabber or slim jim. This method is far less dangerous than using a prying tool and can be utilized even if you don't have access an screwdriver.

Another option to unlock a car without damaging its interior or exterior is to use a wire coat hanger which has been cut into a hook. It can be used to grasp the lock and may work better than the flat screwdriver as it is less likely to cause damage to the paint of the vehicle. You should still look at the other doors to make sure there is no other way to gain access to the door.

You could also try a plastic bag that has been bent into a noose-like or v-shaped shape, but you'll need to be cautious not to tear it, as it could make your situation worse. This trick is especially useful if you can't find the lock button. It may not be as secure as using an iron wedge or coat hanger but it could be helpful when you are in a tight spot.

The best advice we can give you on getting locked out of your vehicle is to stay calm and prioritize safety. Luckily, there are several ways to resolve this type of problem, and if you study this article, you'll be ready for any scenario that comes your way. You can unlock your car opening service by following our instructions. This will avoid unnecessary damage and stress. Of course, if you are able, make sure to take your keys with you when you leave your vehicle.

Shoelace

It's one of the "oh crap!" moments that can cause a lot of trouble. In the event of an emergency it's a good idea keep a few items in your possession that can help you unlock your vehicle without breaking the windows. Certain of these items are simple to find and can save you the cost of a locksmith or waiting for roadside assistance to arrive.

A twine or shoelace can be used to unlock a car. It's easy to use and will work on a variety of cars. The most important thing to consider is a car that has post locks. These can be stacked vertically on the window sill and are easily accessible from outside the car. Use a shoelace and a slip knot to get the job done. Then, wiggle the shoelace into the crack between door and window frame. Once the slip knot has been set in the right place, pull both ends of the string upwards to loosen the lock.

This method is only applicable on older models with an open lock with a hook. If you have a screwdriver on hand, it can be used to unlock the door more forcefully. You can also use a pole that you can grab from a nearby object like a doorframe, or an object of wood to stick into the window frame. This will make room for a rod to push the interior locking button.

While the above methods are relatively safe for most drivers, it is best to seek help if possible. This can help avoid further damage to your car and reduce the risk of an accident caused by stress. If you don't own a mobile phone or aren't able for assistance It is important to let trusted friends and family members know where your car is at all times. Also, a spare set of keys could be stored in an easily accessible location in the vehicle so that you can retrieve them if needed.

Wire Hanger

There is no doubt that locking your keys in the car can be a traumatic experience. However, the trick is to remain calm and think about what options you have for retrieving them. You can avoid making the situation worse if do not get caught up in panic.

You can use a modified wire hanger to get into your car. You'll have to unravel the coat hanger so that it has a straight slant and a hook that you can use to manipulate the lock rod inside of your door. When you have reached the rod of your lock, you should be in a position to pull it upwards, which will open the door.

You can also use a rod, or even an iron piece from your vehicle. It is essential to make sure you don't cause damage to your vehicle during the process and it is ideal if you can do so without taking the car apart. This method works better for older cars than modern ones. However it can be utilized on models with distinctive door handles on the outside.

You can do the same thing with the use of a shoestring tied into the slip knot. This is a good idea for a postlock, but will be more difficult to maneuver as you will rely on the tension of the string to grab it. The best way to do this is by threading the shoestring through a tiny hole that you can create in the weatherstripping of the door of your vehicle. Once the string is through you can pull it tight to create a loop which will snap around the lock and allow you to remove it. This method is extremely effective if you're lucky enough to locate the lock in the correct place.