• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Sash Repairs

Check the windows sashes regularly for any damage, mildew and mold. By catching these problems early, you can save money on repairs in the future.

The sash is the interior framing that can be moved vertically either up or down in windows that are open. This article will teach you how to do a variety of simple repairs to the sash.

Weather Stripping

Wooden window sashes can give an elegant look to your home. They are also sturdy and last for a long time if they are properly maintained. However, they can be damaged or deteriorate in time due to exposure to the elements and wear and wear and tear. However, sash repair experts can restore your windows to their original condition and keep them looking fantastic for much longer than newer replacement windows.

Weather stripping is the primary thing to address when repairing windows that have sash. It's located on both the frame and sash. It can cause drafts if it's damaged or is loose. Start by identifying the window brand and the date of manufacture for the glass window repair (etched on the corner of the glass or the aluminum spacers between panes). Then, remove the sash and mark its height and width to find replacement weather stripping to match.

Then, remove the sash from its holder and place it on flat surfaces to allow you to see all four sides. If your sash has a double glazing repair near me-hung, you'll have to remove the weights as well as the ropes that go with them, which should have fallen into the intended pocket in the jamb liner. Once you've removed the sash, use a utility knife to cut away the weather stripping from the corners. Then, remove it by hand or using a putty knife.

Once the sash has been cleaned, you can replace parting stops. These are long pieces that split the sashes. Pam prefers to use standard 1/2-inch by 3/4-inch window trimmings from the lumberyard. However, you could also substitute with a scrap piece of wood.

After removing the stopper and cutting it to length after which, apply a thin layer of glazing compound over the bottom of the sash. Smooth the compound with your putty tool and let it dry at least a day. When it's completely dried, apply a top coat of acrylic latex paint. This will protect the putty and give your sash a fresh look.

Sash Hardware

The hardware that supports window sashes is susceptible to wear and tear from age and use, and the result can be a door or window that isn't able to open or close easily. The good news is that fixing and replacing this hardware is typically quite simple and inexpensive. If you're having trouble opening the sash, spray some lubricant into the jamb channel. Then, slide the sash up and open to see if it resolves the problem. If not, the problem is most likely due to the balance of the sash and you'll have to take off the sash to gain access to the hardware.

Sashes for windows should be able to be able to open and close with minimal effort. However, this may be difficult if the weights are worn out or the sash-to-rail meeting rail is not properly glazed. This problem can be due to many factors, including an absence of maintenance or a mismatched weight rating.

If the hinge arms of a window are beginning to slide, this could cause the sash's to drag and eventually strike the frame in the corner that's in the opposite direction of the hinge arm (Photo 1). To fix the problem make sure the sash is in the proper position within the frame opening and then remove it. If the sash has been screwed to the hinge arm, you'll need to remove the hinge arm and replace it (Photo 2). Install the new sash next (Photo 3).

Due to hinges that are sagging, and a general deficiency in energy efficiency, older windows, especially those in older homes, may be difficult to open or close. In many instances, a few easy repairs can turn these windows into smooth operation again and save the homeowner money on energy costs.

To make these repairs to sash, it's important to have all of the tools needed before you begin. Mark the hinge channel's location on the frame (Photo 1) with pencil. This will help you get the channel back in the correct position after you've finished. Remove the sash and then remove all hardware, including the parting beads, cords, and chains that keep the sash in place. A hot gun with nozzle shield and medium setting will soften any hardened putty. Remove the old sash and put it in a bag with a label.

Sash Weights

Whether your window sash repairs are to replace a broken cord or to keep the windows functional and functional, replacing worn-out weights on sash can improve sash operation and help reduce energy costs. Sash weights are heavy, lead or iron cylinders, which are enclosed in a hidden cavity and linked to the moveable window sash using rope. They function as counterbalances, allowing you to open and shut the window without requiring mechanical or electrical devices. If they fail, sashweights tend to be left unnoticed or disabled by homeowners.

A weight in a sash that has fallen out of the cavity is difficult to recover, so you will want to find a new one that fits correctly. You will also require a new piece of string, a length of sashcord and some sashpulleys to tie the new weights to the cord.

Older wood windows are joined using mortise and tenon joints. Hammers and pins can be used to cut off the wood pegs holding the components together. Most of these pegs have an enormous diameter on one side and a smaller one on the other, so it is crucial to take out the smaller-diameter sides first. Later sashes used glue instead of pins. They can be cut by using a knife and a mallet.

Once the sash has been removed, you can take off the sash stops and access the weight pockets. This is typically done by drilling a small hole at the bottom of every jamb. This hole is covered by an access panel of wood which can be removed to allow you to observe the inner workings of the frame.

Once the sash is stopped and the access panel has been removed, you are able to remove the weight you used and replace it. Make sure you weigh the sash prior to you begin, as the weights that were previously used may be different in size from what you require. Once the new weight is installed, tie a string to it and then thread it through the pulley for the sash. Then attach the string to the frame, but leave a few inches of string protruding from the head for future adjustments.

Sash Cords

In most old double-hung window repairing, a cord or chain is attached to the weights. This supports and keeps the sashes in the jamb level. Over time these cords can break, making it difficult to raise the window. A new sash cable will give you the ability to raise and lower the sash, and keep it in position when opened.

To replace sash cords the first step is to remove the access panels from the jambs. They are typically nailed or screwed in and must be removed or repositioned. You might be able to employ a hammer and chisel for removing them but it's best to lay down dust sheets prior to starting any work.

Once the access panel is removed, you can begin working on the sash. Take the narrow beads (also called "tie rails") out of their grooves using the chisel or flat bar. It's important to be patient because they are usually stuck or nailed to the floor. If the sash remains in place, pull the mortise and tenon joints free with a hammer or screwdriver, then remove each wood peg. The sash should be able move freely now, but it might require some lubrication to make it feel less stiff.

Measure the length of sash chain/sash cord required to reach the sash slot on the bottom, and the pulley located at the top of the jamb. Cut the cord or chain and fix it as described in Step 6 above. You can use a hammer, nails or screws. However nails are less likely than screws to cause damage.

It is best to keep the original weights in place unless you've purchased a kit to replace the counterbalance. It's not too expensive to purchase these from salvage shops for architectural purposes and they'll be easy to install once you've got the sash unlocked. Depending on the size and shape of your window you might need to install one or two sashweights in order to keep it open.