• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Wood Burning Fires Need to Be Hot and Clean

The warmth and ambiance of a wood-burning fireplace is not only soothing and mesmerizing but also essential to our health and well-being. They need to be warm and clean in order to be effective.

Green wood, also known as unseasoned wood, has an excessive amount of moisture which makes it difficult to ignite and burn effectively. Kiln dried, or seasoned wood has a low moisture content and is therefore easier to ignite and keep burning.

Efficient Combustion

The wood fire should be hot enough to snuff out moisture and reach temperatures over 540 deg F. 900 deg F in ideal conditions) in ideal conditions) where the secondary combustion process starts. This is the key step to efficiently burning fuel while reducing emissions and smoke in the flue.

It is crucial to remember that the temperature needed for secondary combustion is dependent on the type of fuel and the environmental conditions. Choose firewood that is well-seasoned and has less than 20% to reduce these variations.

The quantity of air that is delivered to a fire will also have an important impact on the temperature and burning time. The more oxygen available the hotter a fire will burn and the shorter its burn duration. A wood fire produces less energy and burn slower when the air supply is slowed.

To ensure maximum burn time and efficiency to maximize efficiency and burn time, a wood stove fireplace insert should be equipped with an adjustable air damper. The wide-open setting lets the fire to take all the oxygen it can get and quickly draw down the fuel supply. The reverse is true for the fire that is restricted to a limited area, where the fire is unable to expand as much.

A well-dried load of firewood is also crucial for efficient wood burning. If wood is cut fresh and hasn't had the chance to dry out it will have a high water content that may make it difficult to burn. For optimal performance, it is recommended that you use only seasoned wood that has been stored outside wood burners for six to nine months.

Another consideration is the BTU content of various types of wood. White pine and spruce could be more affordable than eastern hardwoods like shagbark, hickory, and black locust, but their BTU numbers are higher. This means that they'll produce more heat for the same amount of wood. This is why it's important to think about your heating needs and the fuel costs when selecting your firewood.

Clean Burning

Wood smoke can create indoor air pollutants, which can irritate lungs and cause respiratory discomfort in senior citizens and children. These pollutants include volatile aromatic hydrocarbons (PAHs) like benzo-a pyrene and formaldehyde, as well as volatile organic compounds like benzene. When firewood is burned and smolders, volatile tars like creosote are also released.

Smoke from older, poorly-designed wood stoves and fireplaces can contribute to poor outdoor air quality by making it harder to see and contributing to photochemical smog. However, new, clean burning fireplaces and wood stoves with modern combustion technology, when used properly can drastically reduce the emissions.

Stage 1 - Moisture vapourizes: As the log gets heated, it releases water vapor that escapes down the chimney flue. This takes more energy than when the log was dried prior to burning. This is a waste of energy that could be used to warm your home.

In the flue, these vapors mix with carbon particles to create smoke. Smoke is among the main sources of particulate matter and smog in the air.

When used correctly when used correctly, wood stoves and fireplaces that utilize clean burn technology can help reduce the problem by converting the logs to charcoal-like conditions that releases less volatile gasses and generates the majority of the energy produced by the log into usable heat.

Avoid using damp, sour or rotten wood to ignite your fire. It's more difficult to burn and generates more creosote. Avoid overburdening the stove with brittle and thin woods like fir or pine. They require more energy to burn and produce more smoke, which could cause chimney fires.

Always wait until the ashes are cool before handling them. Store or dispose of ashes in a safe manner. They can re-ignite when exposed to water and are hazardous in landfills. Instead, ensure that you make use of them in your garden or around the home.

Storing, seasoning and correctly burning your wood will help you save money and ensure that your stove is operating efficiently. Cleaning your chimney on a regular basis is essential to eliminate creosote, particulates and other debris that has been deposited. This will also prevent chimney fires and ensure safe operation.

Safety

It's difficult to beat a warm fire on a cold winter night, but safety precautions should be taken. If fires are constructed incorrectly or left unattended, or if they are burned the risk of dangerous fumes entering the home. Creosote may also build up in the chimney. These deposits could block the flue, impede the flow of air and cause your wood stove or furnace to operate less efficiently.

Never burn treated or painted wood, household waste, rags, paper and other combustible materials in your wood-burning stove or fireplace. They emit toxic fumes, such as carbon dioxide and create toxic gasses. Don't use the flammable liquids to ignite fires. Kerosene, gasoline and lighter fluids can cause an increase in emissions, cause toxic creosote, and even cause chimney fires.

Keep combustible materials, such as curtains, furniture and toys, a safe distance from your stove or fireplace. Don't hang clothes near your wood burning fireplace. Make sure your children are aware that the fire is hot and should not be touched.

Only use wood that is seasoned in your fireplace or stove. The wood that is seasoned has been dried during the summer months to reduce the moisture. Wet woods emit more smoke and creosote, whereas mature logs are more efficient and cleaner. The wood that has been seasoned is darker, has cracks along the end grain and sounds hollow when you tap it. Store your logs outside, neatly stacked and with the top wood burning stoves covered, but allowing air circulation around them.

Be aware not to overload your stove or fireplace as appliances that are overloaded produce more smoke and less heat. Fires that are overloaded can also produce dangerous levels of carbon monoxide. If you have an older appliance that has an insulated metal liner, check the liner on a regular basis for signs of wear and tear that can cause an explosion in the chimney.

The EPA recommends using split, dry and well-seasoned wood in order to help reduce the amount of smoke you breathe in your home. Make a fire by using small wood burner pieces. Avoid soft woods such as pine. Pine is a good starting material for a fire, but shouldn't be used beyond that. These woods with softer sap contain and resin that when burned, create an excessive amount of creosote in the chimney.

Maintenance

A warm flame in a wood burning fireplace (Wiki.gta-Zona.ru) is the perfect method to relax during the cold nights of winter. It is essential to keep your fireplace in good condition to get the most out of it. Regular cleaning and inspection of your fireplace is the best method to avoid any issues that might occur. This prevents creosote buildup and keeps the chimney clear for maximum efficiency.

Creosote, a dark, crusty flammable material that forms in the flue when wood doesn't burn completely. When a lot of creosote builds up, it can lead to chimney fires. These are the second most frequent cause of house fires across the United States. There are a variety of factors that can cause a fire to fully burn, such as dampers that have not been properly closed, cracks in the chimney liner and a lack of regular cleaning and removal of ash.

Incorrectly seasoned british wood burning stoves causes the accumulation of creosote to an excessive degree. Water could comprise up to half of the weight of a wooden piece. This water boils during the fire and releases heat. It also consumes energy. The water vapor that results is then condensed as creosote or released into the air as part of the smoke.

Another harmful side effect of burning wood burning stoves ideas is soot. Soot is softer than creosote, however it can stick to the walls of your fireplace, and block air circulation. It is also a fire hazard because it is easily ignited when exposed to combustible gases.

Take the ashes out of your fireplace and place them in an ash bucket made from metal. Keep it outside on a non-flammable area. Don't forget that the remains of the ashes are a good source of nutrients for your plants. Spread them out in your backyard!

Regularly ensure that your chimney and fireplace are checked by a Regency Dealer certified. The technician will look for cracks, creosote levels, soot levels as well as a properly shut damper, and the condition of the catalyst. If you have a two-stage fireplace that includes an air tube, the catalyst should be removed and visually inspected for obstructions. Check your user manual for directions on how to accomplish this for your specific unit.